Remote Blowers for Labconco Protector Laboratory Hoods

Choose from fiberglass or coated steel blowers to provide the specified face velocity in your Protector* hood. The duct length increments include the equivalent resistance factors for all the ductwork that is part of the fume removal system. For example, a 12 inch diameter 90° elbow is the equivalent of 25 feet of straight duct. If these factors are not considered, the blower may be undersized. Please inquire for further assistance in selecting the correct blower, appropriate ductwork and fittings for your Protector laboratory hood.
The blower for Protector 48 has a 735 CFM/100 fpm face velocity; the blower for Protector 60 a 960 CFM/100 fpm face velocity. The blower for Protector 72 has a 1170 CFM/100 fpm face velocity. The blower for Protector 96 has a 10 ft x 10 ft x 12 in. Y-connection and a 1600 CFM/100 fpm face velocity. Please inquire for appropriate ductwork and fittings for your protector laboratory hood.