Thermo Scientific Model 960 Titrator PLUS

The Orion 960 is intended for use in laboratories where automation is needed to overcome problems of sample throughput or analytical complexity. What differentiates the Orion 960 from other single parameter analyzers or automatic titrators is its versatility. Not only can it be used for performing classical titrations, it can also automate the measurement of any species measurable by ion selective and pH electrodes. Quick release fittings on the bottles make it easy to disconnect one bottle and connect another. There's no need to stock spare burettes for fast reagent changes. The dispenser is a rotary reciprocating pump. Unlike an automatic burette, the pump has no valves to switch for refilling. Also, there is no dead volume, making changing reagents easy and fast. Typical problems encountered when doing manual analyses are virtually eliminated, making ISE technology better suited for a busy day of testing. Higher levels of automation can be achieved by adding a Orion 960AD workstation as an auxiliary reagent dispenser. For routine measurements, a short form printout is available. All pertinent GLP information is provided, including sample ID, electrode, time, date and the result. The Orion 960 can calculate results in 22 units of measurement. In addition, diagnostic error messages may be printed to provide troubleshooting information. For method development, a long form printout is available where raw data is printed, including volume of reagent, millivolts, time elapsed, a plot of the curves where appropriate and method parameters.

960 Titrator PLUS System, complete with EA 940 pH/ISE meter, Orion 960 Titrator Plus Module. Includes: Base assembly, tower assembly, electrode holder, stirrer, two dispenser probes, anti-diffusion dispenser probe with six tips, tubing kit, calibration kit, cable (Orion 960 and EA 940), reference tablet, two working solution bottles, two dip tubes and caps, line cords and instruction manual.

960 Titrator PLUS Module (Module does not include EA 940). Includes: Base assembly, tower assembly, electrode holder, stirrer, two dispenser probes, one anti-diffusion dispenser probe with six tips, tubing kit, calibration kit, cable (Orion 960 and EA 940), reference tablet, three speed number note pads, two working solution bottles, two dip tubes and caps, PROM upgrade kit (to update software in EA 940), line cord, U.S. standard connector and instruction manual.